Where has the
summer gone? The car is still not ready!
It has progressed a little, all the suspension has been
painted and fitted. I have also manufactured an adjustable
rear anti-roll bar. Next, I must fit the brakes and run the
brake lines.
Then I can re-build the engine and fit the 45 DCOE Weber
which I have acquired.
In the following photos, the car is fitted with 9.00 x 20.0
x 13 rear tyres and Formula Ford 1600 front tyres. I will
have to source suitable rims, for the front, to suit 7.2 x
20.0 x 13 tyres (ideally 8 x 13 Revolution alloys with 3.75"
pcd).
|
|